Do-it-Yourself Hammock Stand Kit  
Customizable DIY stand, assembled using 4X4 dimensional lumber
to your own specifications. Kit consists of sturdy powder coated, sea air resistant steel brackets and end caps with hammock support loops.
Available in
black or
platinum
.

To complete the kit you will have to purchase five 4 x 4 posts at your local lumber yard.

1- 8ft long 4 x 4 post (center beam)
2- 8ft long 4 x 4 posts (hammock support posts)
2- 4ft long 4 x 4 posts (legs)(these will need to be cut in half)

For Longer Hammocks
1- 10ft long 4 x 4 post (center beam)
2- 8ft long 4 x 4 posts (hammock support posts)
2- 4ft long 4 x 4 posts (legs)

You will also need wood screws to stabilize the lumber within the brackets.

These stands kits are excellent for spreader bar hammocks. You can use them with Mayan and Brazilian hammocks; but the angle geometries make these stands quite long before you get sufficient height. The Viking or Vario Stands will be better for barless hammocks.
Build your own gorgeous wooden hammock stand with this easy to use kit!
TECHNICAL SPECS:

Connecter:13.4x9.3x8.3 inch
Cap:5.3x3.9x3.1 inch
Thickness: 0.08 inch
Weight: 22 lb
Weight Capacity: up to 500 lbs.